TL-SPAP190G-P/D-DB is a next-generation AC1900 outdoor AP launched by TP-LINK, which provides Gigabit Ethernet port and Gigabit optical port for data transmission, and provides DC, standard PoE, and passive PoE power supply modes, providing flexible networking. It can be widely used in outdoor scenarios such as squares, parks, stations, and stadiums to provide high-quality wireless coverage.

1. Adopt 11AC wireless technology

Dual-band concurrency, 1900Mbps wireless rate

Support 2.4G/5G dual-band concurrency, 2.4GHz band provides 600Mbps wireless transmission rate, 5GHz band provides 1300Mbps wireless transmission rate, Built-in omnidirectional high-gain dual-polarization antenna.


2. Professional hardware and software design

Automatic RF tuning to optimize the overall performance
It supports automatic radio calibration, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel according to the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed and high-performance operation state.


Intelligently Kick Weak Signal Devices to Improve Wireless Quality

You can set a weak signal strength threshold to intelligently identify, prohibit, and kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.


Intelligent roaming technology to enhance the wireless experience

of every user The intelligent roaming technology based on the 802.11kv protocol helps mobile phones, pads, computers and other terminal devices automatically connect to the AP with the best signal quality in the high-density environment of multiple APs such as conference rooms, office areas, bars, and KTVs, so as to achieve fast roaming within 50ms, effectively improving the user experience of each user and the overall performance of the wireless network.


3. High-performance interface

Gigabit network port, higher speed
Internet access The 1000Mbps network port is used to greatly increase the speed compared with the 100 Gigabit network port, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access requirements in multi-user and high-bandwidth scenarios.


Gigabit SFP optical port, more convenient
direct connection
One Gigabit SFP fiber module slot is provided to install SFP fiber module. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.


4. the construction is convenient, the management is simple, the maintenance is worry-free, a variety of power supply methods

a, standard PoE power supply, the construction is Standard PoE power supply is used, no external power supply is required, and each AP only needs one network cable, which is convenient for construction.

Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.


b. Passive PoE power supply, power supply transmission distance up to 100 meters

Support Passive PoE power supply, power supply transmission distance up to 100 meters, solve the problem of difficult power access in outdoor environment, and flexibly distribute points according to needs.


c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.

Note: This product ships DC power adapter and non-standard PoE power supply module.


A variety of installation methods

At the same time, it supports pole and wall mounting, which is easy to install and adapts to more scenarios.


IP65 Dustproof and Waterproof

It provides IP65 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.

• 11AC dual-band concurrency, the maximum wireless rate can reach 1900Mbps
• Gigabit Ethernet port, Gigabit SFP optical port, high-speed transmission, convenient direct connection
• External dual-band waterproof detachable omnidirectional antenna, independent RF circuit design, suitable for wireless coverage of outdoor venues
• The shell design of the professional room can reach IP65 level of waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• Automatic RF tuning optimizes overall performance
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Intelligent roaming to improve wireless experience (not supported by 11R, supported by software updates in the near future).
• DC, 802.3at PoE and Passive PoE power supply, flexible distribution
• Pole/wall mounting, easy maintenance
• Centralized management of TP-LINK commercial network cloud platform is supported

Hardware specifications

Software Specifications (FAT AP Mode)